+86-571-85397237

the installation of Fiberglass Ceiling Tiles directly affects the decorative effect of indoor walls and also affects the sound absorption effect.

Exposed Grid Installation Method

Applied Ceiling tee bar System, and the grid is installed according to the specification of the fiberglass ceiling tiles.

Then put the fiberglass ceiling tiles directly on the T bar grid, which is used for the installation of the square edge and tegular edge fiberglass ceiling tiles.

The feature of this installation method is that it is relatively simple, and the maintenance and replacement are also very convenient. 

The T bar grid is exposed, and the installation of the drop plate can form a concave seam, which is more three-dimensional the flat seam formed by installation.

Concealed Grid Installation Method

Generally, H-type light steel keel is used to install the keel according to the specification of the selected board.

Insert the fiberglass ceiling tiles with edges groove or one edge groove and one edge tegular into the keel system one by one.

The characteristics of this installation method are that it is not divided by the keel, has no board seam, and has good integrity of the decorative surface. But the maintenance and replacement are also more troublesome.

Flat Pasting Installation Method

Firstly, install gypsum board, fiber cement board or other lightweight wall board with galvanized steel farming by screws as the bottom plate, the surface should be flat, and then apply glue on the back of the fiberglass fiber board.

It is not necessary to fully coat the board surface; several points can be applied. then past the fiberglass ceiling board on the bottom plate.